123 HP AMP 125 Troubleshooting
Undoubtedly, the 123 HP AMP 125 Troubleshoot Printer causing error is a common problem. The Troubleshoot issues can be easily resolve it manually with the instructions. Just, Tell your trouble to 123.hp.com and obtain the appropriate guidelines for your problem and resolve it.
The Errors that you might get in 123HP AMP 125 Troubleshoot Printer such as:
- Cartridge Issues
- Network Problem
- Fixing Poor Print Quality
- Black or Color Ink doesn't Print
- Bluetooth Audio System Problem
123HP AMP 125 Printer Cartridge Issues
The Ink Cartridge error might get due to Incompatible Cartridges and Cartridge Missing in the slot. When the cartridge problem occurs the 123HP AMP 125 Printer will not make Print.
- Begin with Turning On the 123 HP Amp 125 Printer.
- Now, Open the Cartridge Access Door.
- And, wait until the HP AMP 125 Printer gets idle and silent.
- Gently, Press the Ink Cartridge to release it from the place. Take away the ink cartridge from the slot.
- Examine the Cartridge and extract the protective tape from the copper contacts.
- To avoid Printer Cartridge issue use the original ink toner which is given along with the 123 HP AMP Printer Cartridge.
- Pull out the Paper output tray and extender to put the ink cartridge toner inside the Printer.
- Then, Install the Ink Cartridge in its slot and push down until it settles down and fixed in place.
- When the 123 HP AMP 125 Installation gets complete, Close the Access Door of Ink Cartridge.
123HP AMP125 Cartridge Cleaning Electrical Contacts
- First of all, Collect all the requirements that need for cleaning.
- To clear the electrical contact, use the cloth and have a bottle of water.
- Open Ink Cartridge Access Door; While before continuing wait for the cartridge to get idle.
- Make Disconnect, if any USB Cable Connected to the 123 HP Amp 125 Printer.
- Release and Remove the Ink Cartridge from the slot.
- Take the Cartridge and hold on it, then insert in the slots by its sides.
- Gently, wipe the Copper Contact. Be Careful while wiping the contact.
- Then, wait for a while until the carriage contact gets dry .
- Now, Insert the Ink Cartridges in their appropriate places. Push down the cartridge until it snaps in the slot.
- Finally, Shut down the Ink Cartridge Access Door.
- Repeat the same process to install the ink cartridges.
- Then, Reconnect the Power cable and Turn On the 123 HP Amp125 Printer.
- If error still persists again, Go to 123.hp.com/amp 125 for instant support.
123HP AMP 125 Printer Wi-Fi Direct Diagnose
- Just, Follow the below steps to diagnose the Wi-Fi Direct Connection Problem.
- Confirm that Wi-Fi Direct Connection is enabled on 123 HP AMP 125 Setup Printer.
- In Order to get Print with Wi-Fi Direct, first establish your connection to your device.
- Go to your Control Panel of the amp 125 Printer, Press the Power button for about 3seconds.
- Find your Network Name and Password has entered correctly for Wi-Fi Direct Connection.
- Keep both the Devices near to the Router, So then the Network Connection will be Strong.
- In some case, if the 123HP Amp 125 Printer is not listed, Just Restart the printer again.
- Disconnect or Eject if any USB Ethernet Cable has Connected to your Devices.
- In Next Sequence, Restore the Network Settings as Default to make Print. Go to Control Panel Display and change your settings.
- Make sure, that you have Installed the updated version of 123 HP AMP 125 Driver.
- To obtain the latest software, Visit 123.hp.com/amp 125 and find the suitable for 123 HP AMP 125 Driver.
HP AMP 125 Printer Fixing Poor Print Quality - Windows
First of all, use the genuine HP Ink Cartridge that came along with HP AMP 125 Printer. HP always recommends you to use the Original Ink. If the Ink runs out and got empty then, purchase the cartridge and replace it again.
- In some case, if you get the ink smears in printouts then follow the below steps.
- Use the HP Printer Assistant and Clean the Ink Smear.
- Turn On the HP AMP125 Printer and Load the plain white paper in the input tray.
- On your Windows OS, search for the HP AMP 125 Printer and Select the Printer from the list.
- Open the HP Printer Assistant and Tap Maintain your Printer. And the Printer tool box will get open.
- Then, On the Device Service, tap Clean Printer.
- The 123HP amp 125 printer will make some noise and feed the paper slowly.
- Wait until the page comes out of the amp 125 printer while before you remove it.
HP AMP 125 Printer Fixing Poor Print Quality - MAC
- Switch On the 123HP Amp 125 Printer and load the paper.
- Click On the Apple menu and tap System Preferences.
- After that, tap Print & Scan/Printer & Scanners.
- Now, Pick out the HP Amp 125 Printer and tap Options and Supplies.
- Hit on the utility, and tap Open Printer Utility.
- When the HP Utility get Opens, Click on Clean Back Of Page Smear.
- Tap on the Clean option and Click OK button.
- Not placing the good quality paper will also make 123 HP AMP 125 paper fixing print quality so change the paper bunch once the issue occurs in your printer.
- Check all the parts of the printer where the paper printing process will be processed.
- If the problem persists again, visit 123.hp.com/setup 125 printer for immediate support.
No Worries! When you can't find Solution
Need Help! Find the Best Solution to Get Rid from Troubleshooting Issues and Operate the
HP Printers. Our Experts will Guide you with an Accurate Solution.
Contact us @ 1-819-716-0730
Can't able to Pair Bluetooth with Mobile Device?
- To Get Start the process, Check whether the Bluetooth light on the control panel is blinking.
- And, On your Mobile Device Confirm that Bluetooth function is turned on.
- Keep the 123 HP AMP 125 Printer and Mobile Device close to the Router.
- If you get the same problems again, just turn off and on the amp-125 printer. And try to reconnect it with same procedure.
- Just, press and hold on the power button for about 6 seconds.
- Clear all the previously paired devices from Audio System Memory. Just, Disconnect everything.
Can't you hear the audio when the Bluetooth light is on?
- When the Audio doesn't stream properly, multiples of issues will persist on the 123 HP amp 125 printer.
- Just, Press on the (+) icon button to Increase the volume.
- And, make sure that both the devices are closer to your router.
- The Router has to be within the range of the devices. So then it will work properly.
- Examine, whether your Mobile is not close with electromagnetic things.
- If the problem is not solved, Turn Off the Bluetooth button to get stop the audio system.
- After a while, Switch On the Bluetooth button again.
- Do Visit on 123.hp.com/setup if anything cause during the 123 HP Amp 125 Troubleshoot problems.
Disclaimer: 123-support-printers.us is an independent service provider for third-party products. Any use of third party trademarks, brand names, product, and services is only for reference and to furnish information. If your product is covered by warranty, the support service may be available for free from the manufacturer. We disclaim any ownership in, right to, affiliation with, or endorsement by unless stated. Users are advised to review our policies before using our Website.